Global site: Chinese | Russian | English

Zhongxin machine, let the machine change the future!

crusher news
News

Home > news

News

Hot Products

Materials

Contact Us

Add:Room 609,Easttower,xiyuan international square,Jianshe Road,Zhengzhou City,Henan Province,China

Tel:+86-371-67660555

Fax:+86-371-86552819

Email:sales@zxcrusher.com

Web:www.zxrockcrusher.com

How to ensure efficient production of hydraulic cone crusher As the first choice for the second and third stage crushing, the hydraulic cone crusher is widely used in the industrial sectors of metallurgy, building materials, light industry, chemical industry and electric power. However, due to the harsh working environment and the use of operators, the hydraulic cone crusher often has various failures leading to downtime. To ensure efficient production of the hydraulic cone crusher, we need to pay special attention to these details.

1.No-load start
The hydraulic cone must be started under no-load condition. After the crusher is in normal operation, the mine can be started to avoid the increase of the motor load, resulting in excessive starting current and even burning the motor.

2. The amount of feed should be even
Timely adjustment of the amount of ore to be added, to ensure that the amount of minerals is evenly and properly added, so as not to increase the local friction of the machine, so that it appears "card machine" phenomenon.

3. Pay attention to check the running part
The hydraulic cone is broken in the first trial operation stage after installation. It should first check whether the running part has stuck or collided. After the inspection is normal, the operation can be started. When running, first run the load for 4 hours, check the flexibility of the pulley, whether the machine is installed firmly, and whether there are other noises.

4. Pay attention to the temperature rise of the rotor main bearing
When the machine is running, pay attention to observe the temperature rise of the main bearing of the rotor. If the temperature rises above the specified value, it should be stopped and checked quickly. During operation, if the machine vibrates too much or an abnormal sound occurs, stop it quickly and check the cause.

5. Repair and replace worn parts in time
For the wear parts of hydraulic cones, especially the main wear parts of the direct contact materials such as the main shaft and gears, the wear parts should be inspected regularly, and the problems should be repaired and replaced in time to avoid the later failures affecting the work efficiency.