The sand making machine sometimes ss suddenly, which not only causes * damage to the machine itself, but also affects the normal production efficiency of the entire production line. Today, the sand making machine manufacturers are here to talk about how to reduce the occurrence of such phenomena and make mining equipment more in line with high-standard sand making requirements.

1.Check the working voltage. If the working voltage of the sand making machine is unstable or too low, it is very easy to shut down the crushing equipment. Therefore, the maintenance personnel should regularly check the daily working voltage of the sand making equipment, and adjust it in time if there is any change to make it meet the production working voltage requirements.

2.Check whether the parts are loose. If the eccentric shaft tightening bush of the sand making machine becomes loose, it will cause the eccentric shaft to jam and shut down the crushing equipment. In addition, when the parts of other key parts become loose, it will also affect the normal operation of the sand making machine. Therefore, in the daily production process, you must always pay attention to check whether the parts are loose, and ensure that all parts are firmly installed.

3. The maintenance of the bearing, the bearing of the sand making machine directly affects the normal operation of the machine, so the maintenance of this part is very important. During the production process, not only must always pay attention to the use of the bearings, but also replace the damaged ones in time. Secondly, the daily lubrication of the sand making machine bearings must be indispensable to prevent the bearing temperature from being too high and eliminate the shutdown of the sand making equipment.