The jaw crusher is simple in structure and easy to maintain, and its working principle is also very simple. On the one hand, the jaw crusher has a simple structure, so it not only has the characteristics of strong crushing ability, but also has the advantage of convenient maintenance. On the other hand, the jaw breaking machine is easy to operate, reliable in * and strong in adaptability, so that it is widely used by the general public in daily life.

The daily maintenance of the jaw crusher is very convenient. Note that the inspection operation must be carried out after the machine is sped and the inspection is correct. After the machine ss, clean up every part of the jaw crusher to ensure the cleanliness of the jaw crusher, and carefully check the work of the machine. The last item is actually a more important link, and that is to check whether there is any looseness between the bolts and the jaws and other connecting parts. If there is, it should be mobilized immediately. In addition, it is necessary to ensure the wear of the transmission components within the allowable range. If there is no crack between the tension rod spring and the tension rod spring, the jaw crusher can work normally.

Common problems and solutions in the daily operation of jaw crushers:
1, When the muddy water content is large, it is easy to block the crushing cavity: reduce the ore supply.

2, The crushing cavity is blocked: temporarily s feeding the ore, and continue feeding the ore after the ore is broken.

3, Already blocked: manual processing.

Then check whether all aspects of the conveying equipment and lubricating device are in good condition, and then adjust and control the miner. If you do not pay attention to the mechanical failure, you must s immediately.