The bevel gear is an important driving part of the cone crusher. Whether it can operate normally or not directly affects the overall reliability of the crusher. The bevel gear is also one of the wear parts of the cone crusher. Let's analyze how to prevent the bevel gear from wearing. 1. The equipment is prohibited from dyeing and running for a long time
If too much material is put into the crushing cavity of the cone crusher, the equipment will be in overload operation for a long time, which will not only improve the production capacity, but also cause serious wear and tear. Gear fractures or fatigue cracks in the tooth roots. Pay attention to the combination of equipment work and rest to reduce gear damage.
2. Strictly control the feeding of the cone crusher
If the material in the crushing cavity contains iron and other impurities, it is easy to cause damage to the gear. Therefore, the feed rate must be strictly controlled to reduce gear damage.
3. Do a good job in gear maintenance
Ensure the lubrication of the gears and reduce the wear of the gears during operation; it is recommended to check whether there are sundries between the gears. If there is any debris, it must be cleaned up in time so as not to affect the meshing of the gears and reduce damage to the bevel gears.
4. Ensure that the gears are properly meshed
If the bevel gear of the cone crusher is not properly meshed in production, it will accelerate the damage of the gear, and it should be ensured that the gear can be meshed normally.