Global site: Chinese | Russian | English

Zhongxin machine, let the machine change the future!

crusher news
News

Home > news

News

Hot Products

Materials

Contact Us

Add:Room 609,Easttower,xiyuan international square,Jianshe Road,Zhengzhou City,Henan Province,China

Tel:+86-371-67660555

Fax:+86-371-86552819

Email:sales@zxcrusher.com

Web:www.zxrockcrusher.com

How to properly spend the running-in period of the sand making machine Everyone knows that the machine needs a certain running-in period. The newly purchased machines and equipment need to be newly run-in in the process of production and processing, and then can be used in our production and life. Jiaozuo Zhongxin Heavy Industry here is simple to tell everyone. Precautions for the running-in period of the sand making machine.

The running-in period of mechanical equipment is also called the running-in period, which generally refers to the process of contact, friction and biting of mechanical parts at the beginning of operation. During the running-in period, the ability of the various components of the lifting machinery to work with each other to adapt to the environment can be adjusted, and the uneven parts on the parts can be worn away. The running-in period of the sand making machine is very important, and it is a key point for the sand making machine to be able to operate normally in the later sand making operation.

The matters needing attention in the sanding machine include: Before operating the sand making machine, please carefully read the instructions and operation manual of the sand making machine equipped by the manufacturer, familiar with the equipment performance; empty load operation and load operation, under normal conditions, empty load It can be operated for 4 hours. When the air load is running, check the flexibility of the lower pulley, whether the machine is installed firmly, whether there are other noises, etc. Check and adjust the loose parts in time to prevent the parts from being loosened. abrasion.

The user also needs to pay attention to the working load of the sanding machine during the running-in period. The working load should not exceed 80% of the rated working load during work. Arrange the appropriate workload to prevent the machine from heating due to excessive work. Pay attention to the running-in period. Lubrication of equipment, poor lubrication, will cause scratches and seizures of precision parts; we should always check the data of each instrument during running-in to see if there is any abnormality.