With the increasing scarcity of natural sand and gravel resources, artificial sand production gradually entered people's vision, and the development of machine-made sand ushered in spring. The production of machine-made sand is inseparable from the main equipment of sand-making machine. Zhongxin sand-making machine is widely used in construction, mining, metallurgy, highway, railway and other fields. What happened in the sand production?

Abnormal vibration occurs in the production process of sand making machine:
1. The material entering the sand making machine is too large, you can check the feed particle size.
2. The impeller of the sand making machine is unevenly worn, check the wear of the impeller and alloy hammer head, and replace it in time if necessary.
3. The impeller of the sand making machine is unbalanced and needs to be adjusted.
4. Improper handling of the foundation of the sand making machine, check the anchor bolts and tighten them.

The particle size of the sand machine is too large
1. Check the wear of the alloy hammer head of the sand making machine, repair or replace the alloy hammer head.
2. Check the wear of the impact plate on the side of the sand making machine and replace it if necessary.
3. Check the feeding particle size of the sand making machine. If the feeding particle size is too large, it will also affect the discharging particle size.

Sand bearing heat
1. The bearing of the sand making machine is short of oil. Check and refuel in time. Too much oil will cause the bearing to heat up. Be sure to check the oil level when refueling.
2. The bearing of the sand making machine is damaged. Check and replace the bearing in time.