Cone crushers are widely welcomed because of their high production capacity, stable operation and good crushing *, but sometimes uneven discharge occurs, which will not only reduce the production efficiency of the cone crusher, but also affect the particle shape of the product. Let's analyze the reasons for the uneven discharge of the cone crusher.

1, The broken material does not conform to the equipment standard
 The cone crusher is suitable for medium and fine crushing of various ores and rocks. However, different models and models of different specifications have different requirements on the hardness, humidity, viscosity, and lumpiness of the material. Once the standard of the material to be crushed does not meet the requirements of cone crushing, uneven discharge will occur. When the hardness and lumps of the crushed materials are too large, the particle size segregation of the crushing cavity of the cone crusher will be serious, and the input materials cannot be completely crushed, resulting in uneven discharge. When the humidity and viscosity of the material are too high, or there are too many fine particles in the material, the material enters the crushing cavity and will stick to each other, causing the material in the crushing cavity to block, which reduces the equipment’s ability to crush the material, resulting in The phenomenon of uneven discharge.

 2, Uneven feeding
Uneven feeding includes too much or too little feeding, deviation of feeding position, etc. If the feeding amount is too much, the material cannot be crushed in time and blocked in the crushing cavity, which *ly affects the crushing effect and causes the phenomenon of uneven particle size of the finished product; if the feeding position deviates, the unilateral impact of the cone crusher will be affected. Uneven force, crushing problems, resulting in uneven particle size of the finished product.

3, Improper size of discharge port
When the size of the cone crusher's discharge outlet is adjusted improperly, it is easy to cause the crushed materials to be too late to be discharged, causing blockage of the materials, affecting the crushing of the materials, aggravating the blockage of the materials, and causing uneven crushing of the materials.

4, The voltage is too low
When the voltage is too low, the production power of the cone crusher is insufficient, which *ly affects the crushing effect of the material, and the insufficient crushing power will naturally lead to uneven discharge.